Tractor Faq - Parts & Information

Tractor FAQ

Here we will cover some of the most frequaently asked questions surrounding tractor repair, maintenance, tractor brands, and much more.

Tractor FAQ
Tractor FAQ - Source: patpitchaya /

Table of Contents

Which Entrepreneur Made Tractors Before Entering The Sports Car Business?

Ferruccio Lamborghini, the Italian auto manufacturer whose legacy is now best remembered for its supercars.

What Tractor Company Started Off As A Saw Mill?

Caterpillar Inc. began as the Holt Manufacturing Co., which developed Caterpillar tracks to power farm machinery and even locomotives in WWI.

Which Country Is Home To The Greatest Number Of Tractors Per Capita?

Bulgaria. It's not even close either, with roughly 748 tractors per 1,000 residents. This number is far more impressive when you consider that the global average is only 34 tractors per 1,000 people.

How Many Tractor Lanes Are There In China?

Nearly half of all farm land in China is farmed by smallholder farmers, with nearly all of them using manual labor. This means that tractors are a rare commodity in the country-- there are only 1.5 for every 100 square kilometers of arable land.

Which European Country Has The Highest Tractor Density?

Sweden has a population density of only 16 people per square kilometer, yet the small country still ranks sixth globally in tractor density with 577 tractors per 1,000 square kilometers.

Which Is The Largest Tractor Company In The World?

John Deere is the largest construction and farm machinery manufacturer in the world (by revenue) for two main reasons: they stick around for the long haul (beating Caterpillar in that category) and they've known how to diversify their business into non-farm sectors like construction, forestry, turf care.

Which Tractor Company Makes The Most Money?

John Deere leads the pack in revenue by a not very close margin thanks to its high-margin, high-tech construction and forestry equipment; its ag business accounts for only 10 percent of the company's overall revenue.

Why Did Caterpillar Tractor Decide ToUnbundle The Price Of Their Tractors?

In the late 1970s, Caterpillar began manufacturing a line of tractors called "Trackwelders" in a joint venture withVolvo to create a low-cost competitor to John Deere and International Harvester. At the time, their product was only half as expensive as traditional crawler-type tractors-- but that wasn't a good enough value proposition for customers who were accustomed to paying a premium for the Caterpillar name.

So Caterpillar decided to unbundle the cost of their tractors, adding up all the components which made up the tractor and providing potential buyers with an itemized list so they could better compare prices with other models. This meant that instead of a customer only seeing the manufacturer's suggested retail price (MSRP) for a tractor, they were also made aware of what each individual part cost. This became known as the "Parts List Price," and it helped consumers save money by allowing them to comparison shop among dealers in their area. In order to make sure that customers didn't buy an itemized list and try to bargain for a discount on the total price, Caterpillar started printing an MSRP on each Parts List which added $2,000 to its value.

Who Makes Cabela's Tractors?

Cabela's Tractors are made by the Agco Corporation.

Who Makes Mccormick Tractors?

McCormick Tractors are made by the AGCO Corporation.

Who Makes New Holland Tractors?

New Holland Farm Equipment Ltd., together with its subsidiaries, designs, manufactures, and sells tractors worldwide.

Why Are Bobtail Tractors Harder To Stop?

When you're driving a tractor, it's easier to stop if the engine is in the front of the vehicle; this is called "tractor bobtail." However, placing the engine towards the back of the tractor makes it harder for drivers to see behind them. This can be especially dangerous on roads with blind corners-- where there's no way to see around the corner-- and during the months of fall, when trees may obscure your view.

Why Is An Off-Road Tractor Good For Forestry?

Tractors can be used across a wide variety of industries: construction, landscaping, farming, and forestry. While off-road dozers are an efficient way to clear land, they are expensive to maintain. An off-road tractor is more versatile, cheaper, and easier to transport to different locations-- making it the right choice for companies that need a dozer to clear land but also want something that can haul logs or other equipment around.

Why Is Caterpillar Tractor Called A Construction Machine?

Construction machines are large, heavy, machines used in construction. This category includes loaders, excavators, bulldozers, and graders.

What Is The Difference Between A Tractor And A Dozer?

A dozer is a machine with an engine that's used to move material around a construction site or push it into place. The blade on a dozer is used for this purpose, and may be raised or lowered depending on the needs of a project. A bulldozer-- which can also be used to clear land-- is a type of dozer.

A tractor has an engine but doesn't have a blade. It's designed for pulling equipment or transporting items from one location to another.

What Do Tractor Loaders Do?

A loader is a type of machine used to move or transport material such as soil, gravel, snow, and sand. If the earth needs to be moved on a construction site-- such as digging out a hole for a foundation-- it's hauled away using a forklift truck or lift truck. However, a tractor loader can be used to pick up material from a pile in a central area and transport it around the construction site.

What Is The Difference Between An Agricultural Tractor And A Farm Tractor?

An agricultural tractor is generally powered by diesel fuel, gasoline, or natural gas. It's designed for performing tasks such as sowing, baling, and harvesting crops. On a farm, a tractor can also be used to tow equipment or transport items from one location to another.

What Is The Difference Between A Farm Tractor And A Lawn Tractor?

A lawn tractor is generally powered by gasoline, and is designed for mowing lawns with a rotary blade. A farm tractor can be used for mowing lawns, but is also designed to perform agricultural tasks such as baling hay or harvesting crops. A farm tractor may have three or four wheels, while a lawn tractor has only two.

Who Makes Branson Tractors?

Branson Tractors are made by the Caterpillar Corporation.

Where Is Mahindra Tractors Made?

Mahindra Tractors are Made in India.

What Is A Skid Steer?

A skid steer is a small tractor with only two track-type wheels on the front and one wheel at the rear. This makes it easy to maneuver-- giving you more control over objects like pallets or large bags of mulch. The name skid steer comes from the fact that it's designed to slide sideways in order to turn.

Skid steers are typically used for landscaping purposes-- moving objects around a construction site or yard. Skid steers are also known as "mini-tractors."

What Do Tractor Attachments Do?

A tractor attachment is a device that can be added to a tractor. There are many different types of attachments, such as brush cutters and forks. How an attachment will be used will largely depend on the type of work being done and the other equipment being handled by a tractor. For example, if the primary use of the machine is to move bales of hay or straw, an attachment that can hold several bales at once could be an effective addition.

What Is A Loader Attachment?

A loader is a type of tractor attachment used to move material such as soil, gravel, snow, and sand. It may be referred to as either a front loader or bucket loader. The bucket can be lifted up and down, depending on the needs of a project.

What Is A Front End Loader?

A front end loader is an attachment that can be added to a tractor. It may also be referred to as a bucket or loader. This type of attachment is used for lifting material from one location to another-- such as filling a dump truck or hauling material from a pile on one side of a construction site to the other.

What Is An A Frame Attachment?

An A-frame is an attachment that can be added to a tractor, typically for lifting and carrying objects. It consists of two beams attached at right angles on each end of the machine. One end holds the object to be carried, and the other end is attached to a tractor bucket or front end loader.

What Is An Auxiliary Hydraulics Kit?

An auxiliary hydraulics kit (also known as an A-kit) consists of hoses, valves, and fittings which can be used to link two hydraulic circuits together. Auxiliary hydraulics allows two tools to be operated at the same time.

Who Makes Bobcat Tractors?

Bobcat Tractors are made by the Bobcat Company.

Where Is Yanmar Tractors Made?

Yanmar Tractors are Made in Japan.

Who Makes Farmtrac Tractors?

Farmtrac tractors are produced by the Ford Motor Company.

What Is A Backhoe Attachment?

A backhoe is a tractor attachment that can be used to dig and carry material such as dirt, sand, mud, and gravel. It may also be known as a bucket loader or loader. Compared to other attachments, a backhoe attachment allows you to utilize more of your tractor's controls while using it-- such as steering and braking. This makes it easier to use than some other types of loaders, which can be more difficult to control.

What Attachment Do I Need For My Tractor?

There are many different tractor attachments that can be used for a wide range of purposes. It's important to first determine what type of work you'll need your tractor for, then choose an attachment based on your needs. For example, if you're planning on using your tractor to move snow-covered dirt and gravel around a construction site, a front end loader could prove very useful. On the other hand, if you plan to use your machine for mowing lawns or landscaping projects involving trees or bushes, an A-frame may be the most effective choice.

What Are Cab Enclosures?

Cab enclosures add a protective barrier around a tractor's cab, similar to that of an enclosed car or truck. Though they may look like simple covers, modern cab enclosures will include features such as insulation and heating/cooling systems. Cab enclosures are typically made with either aluminum or fiberglass.

What Do Tractors Do?

Tractors are heavy machinery that can be used for a wide range of tasks. They can be used to till the soil, plant crops, mow lawns and landscaping projects, move materials from one location to another, and much more. Tractor loaders and other attachments can also be added to create specialized machines for specific purposes.

Who Makes The LS Tractor?

The LS tractor is made by the LS Tractor Company.

Why Does My Tractor Need A Transmission?

Transmissions are used to make it easier for a machine to perform various tasks by allowing the operator to change gears. For example, if you're moving your tractor from one location to another, you can switch it into high gear to increase its speed or torque-- then return it back into low gear when you need more power and control. By using gears instead of an engine's throttle alone, transmissions allow for greater versatility.

How Much Does A Tractor Tire Weigh?

Tractor tires are typically made of solid rubber and weigh between 480-590 pounds each. They are obviously incredibly heavy, so it's important not to lift them without the help of another person or a crane.

How Much Is A Tractor?

Tractors can range in price and depend on numerous factors such as size, brand, features, attachments, etc. A comparable tractor to the New Holland T8.275 would likely sell for about $33000-$40000.

The cost of a tractor will vary based on its make and model-- but most new models can be expected to retail between $16000-$30000. However, used tractors may only cost around $3000 if they're in poor condition-- or up to several times that amount if they're fully-functional and low-mileage machines.

What Is PTO On A Tractor?

PTO stands for power take-off, and it refers to a tractor's special shaft that can provide power to other equipment connected to it. For example, if you have a hay baler, backhoe or other attachment connected to your tractor through its PTO, the machine will be able to utilize the engine's horsepower while running-- which will increase its speed. The more powerful your tractor is, the greater range of tasks you'll be able to perform at once with additional attachments and tools.

How Long Is A Tractor Trailer?

A typical tractor trailer is around 45 feet in length-- however, they can vary in size depending on the type of truck and cargo being transported.

What Is The Tractor Shed?

The tractor shed is a building for storing tractors and other farm equipment. It's typically an open structure with a roof so that it can also provide shelter from rain or snow when necessary.

How Much Horsepower Do I Need In A Tractor?

Horsepower refers to a machine's maximum power output, which will depend on its engine size-- along with several other factors such as transmission type, tire size, etc. In general, you should always choose a tractor with greater horsepower than you think you'll need-- since its capabilities will be limited if its horsepower is too low.

What Is A Tractor Hitch?

A tractor hitch is a special type of drawbar that attaches to your tractor's rear, similar to the way a trailer hitch works. It allows you to attach all sorts of equipment and tools such as plows, mowers, wagons or trailers for transporting materials. A typical tractor hitch will have 2-5 adjustable slots so that it can fit various sizes of PTO shafts.

What Is A Tractor Trailer?

A tractor trailer is a very large vehicle that transports cargo over long distances. It consists of several core components including the tractor-- which pulls the trailer behind it, and a semi-trailer that can be detached from the tractor in certain circumstances. The weight of a typical tractor trailer must remain within legal limits determined by each state to ensure safety on public roads.

What Is A Tractor Drawbar?

The drawbar is another name for a hitch or coupling device, and it's attached to your tractor's rear to provide an attachment point for various tools or equipment such as trailers, hay wagons, tillers, snow blowers and more. It usually has two parts: one lies under the tractor and comes up to meet with an adjustable coupling pin, which is used to attach various pieces of equipment. The second part of the drawbar extends back from its coupling pin and attaches to the rear of the tractor's hitch ball-- where it's secured with a locking pin.

How To Drive A Tractor?

Driving a tractor is relatively simple once you get used to its steering wheel. To move the machine forward, push the top of the steering wheel forward while pressing down with your left foot on the gas pedal at the same time. You should also press your right foot down on the brake pedal so that it doesn't lurch suddenly while moving-- especially if there are additional pieces of equipment attached to it.

What Loader Fits My Tractor?

There are several types of loaders available for tractors, as well as a range of sizes and accessories. The type you need will depend on the work you plan to do-- as well as your budget. For example, if you have a larger tractor with greater horsepower to pull heavy machinery, you'll want a heavy-duty loader that can handle anything from snow removal to plowing fields. Smaller tractors might not be able to hold such a large piece of equipment without causing damage.

How Much Is A Lamborghini Tractor?

A Lamborghini tractor, like any other luxury car, will generally cost several times more than a conventional tractor. The first "Lamborghini" tractors were made in the 1950s and '60s by Steyr-Puch. Today, the company continues to make related products such as combine harvesters under license from Lamborghini. Some examples of modern lamborghini tractors include models such as the SP 150 and SP 260 by New Holland - which feature bright colors and flashy style to evoke an image of speed and power-- along with other high-end features such as four wheel steering.

How To Check Hydraulic Fluid On New Holland Tractor?

On most tractors built by New Holland, the oil reservoir is located in or around the hydraulic tank. First, make sure to stop the engine before checking any fluid levels-- then open up your cap and inspect how much oil remains in it by looking through the sight glass on top of it. If you need to add more fluid to the tank, simply open its lid and pour it into that space using a funnel or other similar device.

What Size Tractor Do I Need?

A tractor's size will depend on its purpose. Agricultural tractors, for example, are designed to withstand the demands of farm work and might include heavy-duty components like stronger frames, larger tires and more powerful engines. On the other hand, construction or industrial tractors are meant for pulling loads (rather than pushing) in jobs such as digging trenches or moving large objects-- so they usually feature an added gear for this purpose to avoid overheating under too much pressure.

How Much Does A Tractor Trailer Cost?

The cost of a tractor trailer will depend on its size, use, type and amount of accessories. It's usually best to start by determining the total cubic feet you'll need-- as this can be converted into measurements for both straight trucks and semi-trailers. Next, you should consider how much weight your trailer might have to carry at one time. Finally, it's important to consider any additional features or options that might be available with the trailer itself-- such as whether or not it has already been pre-owned or is new.y

What Is A Bobtail Tractor?

A Bobtail Tractor is a Tractor which does not have any trailer attached. A Bobtai can be easily identified by the fact that it doesn't have a fifth wheel, although some bobtails have a detachable tow bar on their fifth wheel for towing small trailers or implements.

What Is A Chicken Tractor?

A Chicken Tractor is a portable chicken coop that is used to provide your chickens with a safe, secure and easily movable home. It can be moved anywhere in/around your yard or garden allowing you to rotate where you let your chickens graze.

What Size Tires Can I Put On A Wheel Horse Tractor?

Wheel Horse tractors come in several different sizes and types, depending on whether it's for use in the barnyard or around the farm-- as well as what attachments it might need to work with. For example, if you plan to attach a plow or snow blade when needed-- then you'll want your tractor to have an appropriate drawbar (aka "three- hitch"). To find out the correct size of your drawbar, simply measure from bolt hole to bolt hole. Now, you can use this measurement as a guide for the correct tire size you'll need to attach.

How To Check Hydraulic Fluid On John Deere Tractor?

To check the hydraulic fluid in a John Deere tractor, first find the fluid reservoir. It should be located somewhere under the hood-- so open it up to look for an oil sight glass on top of the hydraulic fluid tank. If you need to add more hydraulic fluid to your tank, simply pull out its wand and use it to siphon some additional oil into that space using a funnel or other similar device.

What Does PTO Stand For On A Tractor?

PTO stands for Power Take Off, which is a device used to transfer power from a tractor's engine to an implement or accessory. Depending on the type of equipment it's hooked up to, this might involve a splitter or clutch-- but in many cases it will be equipped with a simple pin that disconnects the two when needed.

How To Change A Tractor Tire?

Changing a tractor tire is just like changing the tires of any other vehicle. First, you'll want to park your tractor on level ground and put it in park (or disengage the PTO). Then, jack up the side of your tractor that needs new tires so that both are off of the ground. After removing or loosening each lug nut with a wrench-- slip each tire off of the wheel studs until you can remove them completely. Once this is done, install your new edge-style wheels onto their respective studs-- making sure they're properly attached before lowering the vehicle back down again. Finally, tighten each lug nut by hand to ensure proper seating before using either an impact wrench or torque stick to finish tightening them securely.

How To Fix A Flat Tractor Tire?

Flat tires can happen to any vehicle, regardless of whether or not they have rims. If you're lucky enough to be able to access your spare tire whenever this happens-- simply lift the vehicle up as if changing a regular tire and use that one instead. However, if you don't have a spare or are experiencing flats too frequently for that method to work then it's time to fix the flat on your tractor itself. Start by removing any nails or sharp objects with pliers before using a patch kit (available at most hardware stores) on the steel wheel in order to create an air-tight seal around it. After this, make sure the puncture is smooth and free from debris before moving on to the next step!

Finally, fill your tire up with air again-- slowly at first to make sure it's properly sealed. If you hear hissing or other similar sounds then stop and re- puncture the area with a small nail or screwdriver until those sounds disappear. Otherwise, just release some pressure from time to time as needed in order to maintain proper inflation without overdoing it. And that's all there is to fixing a flat tire for now!